Graybyt3 Was Here

Linux server6.maghost.ro 4.18.0-477.21.1.lve.1.el8.x86_64 #1 SMP Tue Sep 5 23:08:35 UTC 2023 x86_64
Apache
91.213.11.6

File Name : connectionpool.py

from __future__ import annotations

import errno
import logging
import queue
import sys
import typing
import warnings
import weakref
from socket import timeout as SocketTimeout
from types import TracebackType

from ._base_connection import _TYPE_BODY
from ._request_methods import RequestMethods
from .connection import (
    BaseSSLError,
    BrokenPipeError,
    DummyConnection,
    HTTPConnection,
    HTTPException,
    HTTPSConnection,
    ProxyConfig,
    _wrap_proxy_error,
)
from .connection import port_by_scheme as port_by_scheme
from .exceptions import (
    ClosedPoolError,
    EmptyPoolError,
    FullPoolError,
    HostChangedError,
    InsecureRequestWarning,
    LocationValueError,
    MaxRetryError,
    NewConnectionError,
    ProtocolError,
    ProxyError,
    ReadTimeoutError,
    SSLError,
    TimeoutError,
)
from .response import BaseHTTPResponse
from .util.connection import is_connection_dropped
from .util.proxy import connection_requires_http_tunnel
from .util.request import _TYPE_BODY_POSITION, set_file_position
from .util.retry import Retry
from .util.ssl_match_hostname import CertificateError
from .util.timeout import _DEFAULT_TIMEOUT, _TYPE_DEFAULT, Timeout
from .util.url import Url, _encode_target
from .util.url import _normalize_host as normalize_host
from .util.url import parse_url
from .util.util import to_str

if typing.TYPE_CHECKING:
    import ssl

from typing_extensions import Literal

from ._base_connection import BaseHTTPConnection, BaseHTTPSConnection

log = logging.getLogger(__name__)

_TYPE_TIMEOUT = typing.Union[Timeout, float, _TYPE_DEFAULT, None]

_SelfT = typing.TypeVar("_SelfT")

# Pool objects
class ConnectionPool:
    """
    Base class for all connection pools, such as
    :class:`.HTTPConnectionPool` and :class:`.HTTPSConnectionPool`.

.. note::
       ConnectionPool.urlopen() does not normalize or percent-encode target URIs
       which is useful if your target server doesn't support percent-encoded
       target URIs.
    """

scheme: str | None = None
    QueueCls = queue.LifoQueue

def __init__(self, host: str, port: int | None = None) -> None:
        if not host:
            raise LocationValueError("No host specified.")

self.host = _normalize_host(host, scheme=self.scheme)
        self.port = port

# This property uses 'normalize_host()' (not '_normalize_host()')
        # to avoid removing square braces around IPv6 addresses.
        # This value is sent to `HTTPConnection.set_tunnel()` if called
        # because square braces are required for HTTP CONNECT tunneling.
        self._tunnel_host = normalize_host(host, scheme=self.scheme).lower()

def __str__(self) -> str:
        return f"{type(self).__name__}(host={self.host!r}, port={self.port!r})"

def __enter__(self: _SelfT) -> _SelfT:
        return self

def __exit__(
        self,
        exc_type: type[BaseException] | None,
        exc_val: BaseException | None,
        exc_tb: TracebackType | None,
    ) -> Literal[False]:
        self.close()
        # Return False to re-raise any potential exceptions
        return False

def close(self) -> None:
        """
        Close all pooled connections and disable the pool.
        """

# This is taken from http://hg.python.org/cpython/file/7aaba721ebc0/Lib/socket.py#l252
_blocking_errnos = {errno.EAGAIN, errno.EWOULDBLOCK}

class HTTPConnectionPool(ConnectionPool, RequestMethods):
    """
    Thread-safe connection pool for one host.

:param host:
        Host used for this HTTP Connection (e.g. "localhost"), passed into
        :class:`http.client.HTTPConnection`.

:param port:
        Port used for this HTTP Connection (None is equivalent to 80), passed
        into :class:`http.client.HTTPConnection`.

:param timeout:
        Socket timeout in seconds for each individual connection. This can
        be a float or integer, which sets the timeout for the HTTP request,
        or an instance of :class:`urllib3.util.Timeout` which gives you more
        fine-grained control over request timeouts. After the constructor has
        been parsed, this is always a `urllib3.util.Timeout` object.

:param maxsize:
        Number of connections to save that can be reused. More than 1 is useful
        in multithreaded situations. If ``block`` is set to False, more
        connections will be created but they will not be saved once they've
        been used.

:param block:
        If set to True, no more than ``maxsize`` connections will be used at
        a time. When no free connections are available, the call will block
        until a connection has been released. This is a useful side effect for
        particular multithreaded situations where one does not want to use more
        than maxsize connections per host to prevent flooding.

:param headers:
        Headers to include with all requests, unless other headers are given
        explicitly.

:param retries:
        Retry configuration to use by default with requests in this pool.

:param _proxy:
        Parsed proxy URL, should not be used directly, instead, see
        :class:`urllib3.ProxyManager`

:param _proxy_headers:
        A dictionary with proxy headers, should not be used directly,
        instead, see :class:`urllib3.ProxyManager`

:param \\**conn_kw:
        Additional parameters are used to create fresh :class:`urllib3.connection.HTTPConnection`,
        :class:`urllib3.connection.HTTPSConnection` instances.
    """

scheme = "http"
    ConnectionCls: (
        type[BaseHTTPConnection] | type[BaseHTTPSConnection]
    ) = HTTPConnection

if not isinstance(timeout, Timeout):
            timeout = Timeout.from_float(timeout)

if retries is None:
            retries = Retry.DEFAULT

self.timeout = timeout
        self.retries = retries

self.pool: queue.LifoQueue[typing.Any] | None = self.QueueCls(maxsize)
        self.block = block

self.proxy = _proxy
        self.proxy_headers = _proxy_headers or {}
        self.proxy_config = _proxy_config

# Fill the queue up so that doing get() on it will block properly
        for _ in range(maxsize):
            self.pool.put(None)

# These are mostly for testing and debugging purposes.
        self.num_connections = 0
        self.num_requests = 0
        self.conn_kw = conn_kw

if self.proxy:
            # Enable Nagle's algorithm for proxies, to avoid packet fragmentation.
            # We cannot know if the user has added default socket options, so we cannot replace the
            # list.
            self.conn_kw.setdefault("socket_options", [])

self.conn_kw["proxy"] = self.proxy
            self.conn_kw["proxy_config"] = self.proxy_config

# Do not pass 'self' as callback to 'finalize'.
        # Then the 'finalize' would keep an endless living (leak) to self.
        # By just passing a reference to the pool allows the garbage collector
        # to free self if nobody else has a reference to it.
        pool = self.pool

# Close all the HTTPConnections in the pool before the
        # HTTPConnectionPool object is garbage collected.
        weakref.finalize(self, _close_pool_connections, pool)

def _new_conn(self) -> BaseHTTPConnection:
        """
        Return a fresh :class:`HTTPConnection`.
        """
        self.num_connections += 1
        log.debug(
            "Starting new HTTP connection (%d): %s:%s",
            self.num_connections,
            self.host,
            self.port or "80",
        )

conn = self.ConnectionCls(
            host=self.host,
            port=self.port,
            timeout=self.timeout.connect_timeout,
            **self.conn_kw,
        )
        return conn

def _get_conn(self, timeout: float | None = None) -> BaseHTTPConnection:
        """
        Get a connection. Will return a pooled connection if one is available.

If no connections are available and :prop:`.block` is ``False``, then a
        fresh connection is returned.

:param timeout:
            Seconds to wait before giving up and raising
            :class:`urllib3.exceptions.EmptyPoolError` if the pool is empty and
            :prop:`.block` is ``True``.
        """
        conn = None

if self.pool is None:
            raise ClosedPoolError(self, "Pool is closed.")

try:
            conn = self.pool.get(block=self.block, timeout=timeout)

except AttributeError:  # self.pool is None
            raise ClosedPoolError(self, "Pool is closed.") from None  # Defensive:

except queue.Empty:
            if self.block:
                raise EmptyPoolError(
                    self,
                    "Pool is empty and a new connection can't be opened due to blocking mode.",
                ) from None
            pass  # Oh well, we'll create a new connection then

# If this is a persistent connection, check if it got disconnected
        if conn and is_connection_dropped(conn):
            log.debug("Resetting dropped connection: %s", self.host)
            conn.close()

return conn or self._new_conn()

def _put_conn(self, conn: BaseHTTPConnection | None) -> None:
        """
        Put a connection back into the pool.

:param conn:
            Connection object for the current host and port as returned by
            :meth:`._new_conn` or :meth:`._get_conn`.

If the pool is already full, the connection is closed and discarded
        because we exceeded maxsize. If connections are discarded frequently,
        then maxsize should be increased.

If the pool is closed, then the connection will be closed and discarded.
        """
        if self.pool is not None:
            try:
                self.pool.put(conn, block=False)
                return  # Everything is dandy, done.
            except AttributeError:
                # self.pool is None.
                pass
            except queue.Full:
                # Connection never got put back into the pool, close it.
                if conn:
                    conn.close()

if self.block:
                    # This should never happen if you got the conn from self._get_conn
                    raise FullPoolError(
                        self,
                        "Pool reached maximum size and no more connections are allowed.",
                    ) from None

log.warning(
                    "Connection pool is full, discarding connection: %s. Connection pool size: %s",
                    self.host,
                    self.pool.qsize(),
                )

# Connection never got put back into the pool, close it.
        if conn:
            conn.close()

def _validate_conn(self, conn: BaseHTTPConnection) -> None:
        """
        Called right before a request is made, after the socket is created.
        """

def _prepare_proxy(self, conn: BaseHTTPConnection) -> None:
        # Nothing to do for HTTP connections.
        pass

def _get_timeout(self, timeout: _TYPE_TIMEOUT) -> Timeout:
        """Helper that always returns a :class:`urllib3.util.Timeout`"""
        if timeout is _DEFAULT_TIMEOUT:
            return self.timeout.clone()

if isinstance(timeout, Timeout):
            return timeout.clone()
        else:
            # User passed us an int/float. This is for backwards compatibility,
            # can be removed later
            return Timeout.from_float(timeout)

def _raise_timeout(
        self,
        err: BaseSSLError | OSError | SocketTimeout,
        url: str,
        timeout_value: _TYPE_TIMEOUT | None,
    ) -> None:
        """Is the error actually a timeout? Will raise a ReadTimeout or pass"""

if isinstance(err, SocketTimeout):
            raise ReadTimeoutError(
                self, url, f"Read timed out. (read timeout={timeout_value})"
            ) from err

# See the above comment about EAGAIN in Python 3.
        if hasattr(err, "errno") and err.errno in _blocking_errnos:
            raise ReadTimeoutError(
                self, url, f"Read timed out. (read timeout={timeout_value})"
            ) from err

def _make_request(
        self,
        conn: BaseHTTPConnection,
        method: str,
        url: str,
        body: _TYPE_BODY | None = None,
        headers: typing.Mapping[str, str] | None = None,
        retries: Retry | None = None,
        timeout: _TYPE_TIMEOUT = _DEFAULT_TIMEOUT,
        chunked: bool = False,
        response_conn: BaseHTTPConnection | None = None,
        preload_content: bool = True,
        decode_content: bool = True,
        enforce_content_length: bool = True,
    ) -> BaseHTTPResponse:
        """
        Perform a request on a given urllib connection object taken from our
        pool.

:param conn:
            a connection from one of our connection pools

:param method:
            HTTP request method (such as GET, POST, PUT, etc.)

:param url:
            The URL to perform the request on.

:param body:
            Data to send in the request body, either :class:`str`, :class:`bytes`,
            an iterable of :class:`str`/:class:`bytes`, or a file-like object.

:param headers:
            Dictionary of custom headers to send, such as User-Agent,
            If-None-Match, etc. If None, pool headers are used. If provided,
            these headers completely replace any pool-specific headers.

:param retries:
            Configure the number of retries to allow before raising a
            :class:`~urllib3.exceptions.MaxRetryError` exception.

Pass ``None`` to retry until you receive a response. Pass a
            :class:`~urllib3.util.retry.Retry` object for fine-grained control
            over different types of retries.
            Pass an integer number to retry connection errors that many times,
            but no other types of errors. Pass zero to never retry.

If ``False``, then retries are disabled and any exception is raised
            immediately. Also, instead of raising a MaxRetryError on redirects,
            the redirect response will be returned.

:type retries: :class:`~urllib3.util.retry.Retry`, False, or an int.

:param timeout:
            If specified, overrides the default timeout for this one
            request. It may be a float (in seconds) or an instance of
            :class:`urllib3.util.Timeout`.

:param chunked:
            If True, urllib3 will send the body using chunked transfer
            encoding. Otherwise, urllib3 will send the body using the standard
            content-length form. Defaults to False.

:param response_conn:
            Set this to ``None`` if you will handle releasing the connection or
            set the connection to have the response release it.

:param preload_content:
          If True, the response's body will be preloaded during construction.

:param decode_content:
            If True, will attempt to decode the body based on the
            'content-encoding' header.

:param enforce_content_length:
            Enforce content length checking. Body returned by server must match
            value of Content-Length header, if present. Otherwise, raise error.
        """
        self.num_requests += 1

timeout_obj = self._get_timeout(timeout)
        timeout_obj.start_connect()
        conn.timeout = Timeout.resolve_default_timeout(timeout_obj.connect_timeout)

try:
            # Trigger any extra validation we need to do.
            try:
                self._validate_conn(conn)
            except (SocketTimeout, BaseSSLError) as e:
                self._raise_timeout(err=e, url=url, timeout_value=conn.timeout)
                raise

# _validate_conn() starts the connection to an HTTPS proxy
        # so we need to wrap errors with 'ProxyError' here too.
        except (
            OSError,
            NewConnectionError,
            TimeoutError,
            BaseSSLError,
            CertificateError,
            SSLError,
        ) as e:
            new_e: Exception = e
            if isinstance(e, (BaseSSLError, CertificateError)):
                new_e = SSLError(e)
            # If the connection didn't successfully connect to it's proxy
            # then there
            if isinstance(
                new_e, (OSError, NewConnectionError, TimeoutError, SSLError)
            ) and (conn and conn.proxy and not conn.has_connected_to_proxy):
                new_e = _wrap_proxy_error(new_e, conn.proxy.scheme)
            raise new_e

# conn.request() calls http.client.*.request, not the method in
        # urllib3.request. It also calls makefile (recv) on the socket.
        try:
            conn.request(
                method,
                url,
                body=body,
                headers=headers,
                chunked=chunked,
                preload_content=preload_content,
                decode_content=decode_content,
                enforce_content_length=enforce_content_length,
            )

# We are swallowing BrokenPipeError (errno.EPIPE) since the server is
        # legitimately able to close the connection after sending a valid response.
        # With this behaviour, the received response is still readable.
        except BrokenPipeError:
            pass
        except OSError as e:
            # MacOS/Linux
            # EPROTOTYPE is needed on macOS
            # https://erickt.github.io/blog/2014/11/19/adventures-in-debugging-a-potential-osx-kernel-bug/
            if e.errno != errno.EPROTOTYPE:
                raise

# Reset the timeout for the recv() on the socket
        read_timeout = timeout_obj.read_timeout

if not conn.is_closed:
            # In Python 3 socket.py will catch EAGAIN and return None when you
            # try and read into the file pointer created by http.client, which
            # instead raises a BadStatusLine exception. Instead of catching
            # the exception and assuming all BadStatusLine exceptions are read
            # timeouts, check for a zero timeout before making the request.
            if read_timeout == 0:
                raise ReadTimeoutError(
                    self, url, f"Read timed out. (read timeout={read_timeout})"
                )
            conn.timeout = read_timeout

# Receive the response from the server
        try:
            response = conn.getresponse()
        except (BaseSSLError, OSError) as e:
            self._raise_timeout(err=e, url=url, timeout_value=read_timeout)
            raise

# Set properties that are used by the pooling layer.
        response.retries = retries
        response._connection = response_conn  # type: ignore[attr-defined]
        response._pool = self  # type: ignore[attr-defined]

log.debug(
            '%s://%s:%s "%s %s %s" %s %s',
            self.scheme,
            self.host,
            self.port,
            method,
            url,
            # HTTP version
            conn._http_vsn_str,  # type: ignore[attr-defined]
            response.status,
            response.length_remaining,  # type: ignore[attr-defined]
        )

return response

def close(self) -> None:
        """
        Close all pooled connections and disable the pool.
        """
        if self.pool is None:
            return
        # Disable access to the pool
        old_pool, self.pool = self.pool, None

# Close all the HTTPConnections in the pool.
        _close_pool_connections(old_pool)

def is_same_host(self, url: str) -> bool:
        """
        Check if the given ``url`` is a member of the same host as this
        connection pool.
        """
        if url.startswith("/"):
            return True

# TODO: Add optional support for socket.gethostbyname checking.
        scheme, _, host, port, *_ = parse_url(url)
        scheme = scheme or "http"
        if host is not None:
            host = _normalize_host(host, scheme=scheme)

# Use explicit default port for comparison when none is given
        if self.port and not port:
            port = port_by_scheme.get(scheme)
        elif not self.port and port == port_by_scheme.get(scheme):
            port = None

return (scheme, host, port) == (self.scheme, self.host, self.port)

def urlopen(  # type: ignore[override]
        self,
        method: str,
        url: str,
        body: _TYPE_BODY | None = None,
        headers: typing.Mapping[str, str] | None = None,
        retries: Retry | bool | int | None = None,
        redirect: bool = True,
        assert_same_host: bool = True,
        timeout: _TYPE_TIMEOUT = _DEFAULT_TIMEOUT,
        pool_timeout: int | None = None,
        release_conn: bool | None = None,
        chunked: bool = False,
        body_pos: _TYPE_BODY_POSITION | None = None,
        preload_content: bool = True,
        decode_content: bool = True,
        **response_kw: typing.Any,
    ) -> BaseHTTPResponse:
        """
        Get a connection from the pool and perform an HTTP request. This is the
        lowest level call for making a request, so you'll need to specify all
        the raw details.

.. note::

More commonly, it's appropriate to use a convenience method
           such as :meth:`request`.

.. note::

`release_conn` will only behave as expected if
           `preload_content=False` because we want to make
           `preload_content=False` the default behaviour someday soon without
           breaking backwards compatibility.

:param method:
            HTTP request method (such as GET, POST, PUT, etc.)

:param url:
            The URL to perform the request on.

:param body:
            Data to send in the request body, either :class:`str`, :class:`bytes`,
            an iterable of :class:`str`/:class:`bytes`, or a file-like object.

:param retries:
            Configure the number of retries to allow before raising a
            :class:`~urllib3.exceptions.MaxRetryError` exception.

If ``False``, then retries are disabled and any exception is raised
            immediately. Also, instead of raising a MaxRetryError on redirects,
            the redirect response will be returned.

:type retries: :class:`~urllib3.util.retry.Retry`, False, or an int.

:param redirect:
            If True, automatically handle redirects (status codes 301, 302,
            303, 307, 308). Each redirect counts as a retry. Disabling retries
            will disable redirect, too.

:param assert_same_host:
            If ``True``, will make sure that the host of the pool requests is
            consistent else will raise HostChangedError. When ``False``, you can
            use the pool on an HTTP proxy and request foreign hosts.

:param timeout:
            If specified, overrides the default timeout for this one
            request. It may be a float (in seconds) or an instance of
            :class:`urllib3.util.Timeout`.

:param pool_timeout:
            If set and the pool is set to block=True, then this method will
            block for ``pool_timeout`` seconds and raise EmptyPoolError if no
            connection is available within the time period.

:param bool preload_content:
            If True, the response's body will be preloaded into memory.

:param bool decode_content:
            If True, will attempt to decode the body based on the
            'content-encoding' header.

:param release_conn:
            If False, then the urlopen call will not release the connection
            back into the pool once a response is received (but will release if
            you read the entire contents of the response such as when
            `preload_content=True`). This is useful if you're not preloading
            the response's content immediately. You will need to call
            ``r.release_conn()`` on the response ``r`` to return the connection
            back into the pool. If None, it takes the value of ``preload_content``
            which defaults to ``True``.

:param bool chunked:
            If True, urllib3 will send the body using chunked transfer
            encoding. Otherwise, urllib3 will send the body using the standard
            content-length form. Defaults to False.

:param int body_pos:
            Position to seek to in file-like body in the event of a retry or
            redirect. Typically this won't need to be set because urllib3 will
            auto-populate the value when needed.
        """
        parsed_url = parse_url(url)
        destination_scheme = parsed_url.scheme

if headers is None:
            headers = self.headers

if not isinstance(retries, Retry):
            retries = Retry.from_int(retries, redirect=redirect, default=self.retries)

if release_conn is None:
            release_conn = preload_content

# Check host
        if assert_same_host and not self.is_same_host(url):
            raise HostChangedError(self, url, retries)

# Ensure that the URL we're connecting to is properly encoded
        if url.startswith("/"):
            url = to_str(_encode_target(url))
        else:
            url = to_str(parsed_url.url)

conn = None

# Track whether `conn` needs to be released before
        # returning/raising/recursing. Update this variable if necessary, and
        # leave `release_conn` constant throughout the function. That way, if
        # the function recurses, the original value of `release_conn` will be
        # passed down into the recursive call, and its value will be respected.
        #
        # See issue #651 [1] for details.
        #
        # [1] <https://github.com/urllib3/urllib3/issues/651>
        release_this_conn = release_conn

http_tunnel_required = connection_requires_http_tunnel(
            self.proxy, self.proxy_config, destination_scheme
        )

# Merge the proxy headers. Only done when not using HTTP CONNECT. We
        # have to copy the headers dict so we can safely change it without those
        # changes being reflected in anyone else's copy.
        if not http_tunnel_required:
            headers = headers.copy()  # type: ignore[attr-defined]
            headers.update(self.proxy_headers)  # type: ignore[union-attr]

# Must keep the exception bound to a separate variable or else Python 3
        # complains about UnboundLocalError.
        err = None

# Keep track of whether we cleanly exited the except block. This
        # ensures we do proper cleanup in finally.
        clean_exit = False

# Rewind body position, if needed. Record current position
        # for future rewinds in the event of a redirect/retry.
        body_pos = set_file_position(body, body_pos)

try:
            # Request a connection from the queue.
            timeout_obj = self._get_timeout(timeout)
            conn = self._get_conn(timeout=pool_timeout)

conn.timeout = timeout_obj.connect_timeout  # type: ignore[assignment]

# Is this a closed/new connection that requires CONNECT tunnelling?
            if self.proxy is not None and http_tunnel_required and conn.is_closed:
                try:
                    self._prepare_proxy(conn)
                except (BaseSSLError, OSError, SocketTimeout) as e:
                    self._raise_timeout(
                        err=e, url=self.proxy.url, timeout_value=conn.timeout
                    )
                    raise

# If we're going to release the connection in ``finally:``, then
            # the response doesn't need to know about the connection. Otherwise
            # it will also try to release it and we'll have a double-release
            # mess.
            response_conn = conn if not release_conn else None

# Make the request on the HTTPConnection object
            response = self._make_request(
                conn,
                method,
                url,
                timeout=timeout_obj,
                body=body,
                headers=headers,
                chunked=chunked,
                retries=retries,
                response_conn=response_conn,
                preload_content=preload_content,
                decode_content=decode_content,
                **response_kw,
            )

# Everything went great!
            clean_exit = True

except EmptyPoolError:
            # Didn't get a connection from the pool, no need to clean up
            clean_exit = True
            release_this_conn = False
            raise

except (
            TimeoutError,
            HTTPException,
            OSError,
            ProtocolError,
            BaseSSLError,
            SSLError,
            CertificateError,
            ProxyError,
        ) as e:
            # Discard the connection for these exceptions. It will be
            # replaced during the next _get_conn() call.
            clean_exit = False
            new_e: Exception = e
            if isinstance(e, (BaseSSLError, CertificateError)):
                new_e = SSLError(e)
            if isinstance(
                new_e,
                (
                    OSError,
                    NewConnectionError,
                    TimeoutError,
                    SSLError,
                    HTTPException,
                ),
            ) and (conn and conn.proxy and not conn.has_connected_to_proxy):
                new_e = _wrap_proxy_error(new_e, conn.proxy.scheme)
            elif isinstance(new_e, (OSError, HTTPException)):
                new_e = ProtocolError("Connection aborted.", new_e)

retries = retries.increment(
                method, url, error=new_e, _pool=self, _stacktrace=sys.exc_info()[2]
            )
            retries.sleep()

# Keep track of the error for the retry warning.
            err = e

finally:
            if not clean_exit:
                # We hit some kind of exception, handled or otherwise. We need
                # to throw the connection away unless explicitly told not to.
                # Close the connection, set the variable to None, and make sure
                # we put the None back in the pool to avoid leaking it.
                if conn:
                    conn.close()
                    conn = None
                release_this_conn = True

if release_this_conn:
                # Put the connection back to be reused. If the connection is
                # expired then it will be None, which will get replaced with a
                # fresh connection during _get_conn.
                self._put_conn(conn)

if not conn:
            # Try again
            log.warning(
                "Retrying (%r) after connection broken by '%r': %s", retries, err, url
            )
            return self.urlopen(
                method,
                url,
                body,
                headers,
                retries,
                redirect,
                assert_same_host,
                timeout=timeout,
                pool_timeout=pool_timeout,
                release_conn=release_conn,
                chunked=chunked,
                body_pos=body_pos,
                preload_content=preload_content,
                decode_content=decode_content,
                **response_kw,
            )

# Handle redirect?
        redirect_location = redirect and response.get_redirect_location()
        if redirect_location:
            if response.status == 303:
                method = "GET"

try:
                retries = retries.increment(method, url, response=response, _pool=self)
            except MaxRetryError:
                if retries.raise_on_redirect:
                    response.drain_conn()
                    raise
                return response

response.drain_conn()
            retries.sleep_for_retry(response)
            log.debug("Redirecting %s -> %s", url, redirect_location)
            return self.urlopen(
                method,
                redirect_location,
                body,
                headers,
                retries=retries,
                redirect=redirect,
                assert_same_host=assert_same_host,
                timeout=timeout,
                pool_timeout=pool_timeout,
                release_conn=release_conn,
                chunked=chunked,
                body_pos=body_pos,
                preload_content=preload_content,
                decode_content=decode_content,
                **response_kw,
            )

# Check if we should retry the HTTP response.
        has_retry_after = bool(response.headers.get("Retry-After"))
        if retries.is_retry(method, response.status, has_retry_after):
            try:
                retries = retries.increment(method, url, response=response, _pool=self)
            except MaxRetryError:
                if retries.raise_on_status:
                    response.drain_conn()
                    raise
                return response

response.drain_conn()
            retries.sleep(response)
            log.debug("Retry: %s", url)
            return self.urlopen(
                method,
                url,
                body,
                headers,
                retries=retries,
                redirect=redirect,
                assert_same_host=assert_same_host,
                timeout=timeout,
                pool_timeout=pool_timeout,
                release_conn=release_conn,
                chunked=chunked,
                body_pos=body_pos,
                preload_content=preload_content,
                decode_content=decode_content,
                **response_kw,
            )

return response

class HTTPSConnectionPool(HTTPConnectionPool):
    """
    Same as :class:`.HTTPConnectionPool`, but HTTPS.

:class:`.HTTPSConnection` uses one of ``assert_fingerprint``,
    ``assert_hostname`` and ``host`` in this order to verify connections.
    If ``assert_hostname`` is False, no verification is done.

The ``key_file``, ``cert_file``, ``cert_reqs``, ``ca_certs``,
    ``ca_cert_dir``, ``ssl_version``, ``key_password`` are only used if :mod:`ssl`
    is available and are fed into :meth:`urllib3.util.ssl_wrap_socket` to upgrade
    the connection socket into an SSL socket.
    """

scheme = "https"
    ConnectionCls: type[BaseHTTPSConnection] = HTTPSConnection

def __init__(
        self,
        host: str,
        port: int | None = None,
        timeout: _TYPE_TIMEOUT | None = _DEFAULT_TIMEOUT,
        maxsize: int = 1,
        block: bool = False,
        headers: typing.Mapping[str, str] | None = None,
        retries: Retry | bool | int | None = None,
        _proxy: Url | None = None,
        _proxy_headers: typing.Mapping[str, str] | None = None,
        key_file: str | None = None,
        cert_file: str | None = None,
        cert_reqs: int | str | None = None,
        key_password: str | None = None,
        ca_certs: str | None = None,
        ssl_version: int | str | None = None,
        ssl_minimum_version: ssl.TLSVersion | None = None,
        ssl_maximum_version: ssl.TLSVersion | None = None,
        assert_hostname: str | Literal[False] | None = None,
        assert_fingerprint: str | None = None,
        ca_cert_dir: str | None = None,
        **conn_kw: typing.Any,
    ) -> None:
        super().__init__(
            host,
            port,
            timeout,
            maxsize,
            block,
            headers,
            retries,
            _proxy,
            _proxy_headers,
            **conn_kw,
        )

self.key_file = key_file
        self.cert_file = cert_file
        self.cert_reqs = cert_reqs
        self.key_password = key_password
        self.ca_certs = ca_certs
        self.ca_cert_dir = ca_cert_dir
        self.ssl_version = ssl_version
        self.ssl_minimum_version = ssl_minimum_version
        self.ssl_maximum_version = ssl_maximum_version
        self.assert_hostname = assert_hostname
        self.assert_fingerprint = assert_fingerprint

def _prepare_proxy(self, conn: HTTPSConnection) -> None:  # type: ignore[override]
        """Establishes a tunnel connection through HTTP CONNECT."""
        if self.proxy and self.proxy.scheme == "https":
            tunnel_scheme = "https"
        else:
            tunnel_scheme = "http"

conn.set_tunnel(
            scheme=tunnel_scheme,
            host=self._tunnel_host,
            port=self.port,
            headers=self.proxy_headers,
        )
        conn.connect()

def _new_conn(self) -> BaseHTTPSConnection:
        """
        Return a fresh :class:`urllib3.connection.HTTPConnection`.
        """
        self.num_connections += 1
        log.debug(
            "Starting new HTTPS connection (%d): %s:%s",
            self.num_connections,
            self.host,
            self.port or "443",
        )

if not self.ConnectionCls or self.ConnectionCls is DummyConnection:  # type: ignore[comparison-overlap]
            raise ImportError(
                "Can't connect to HTTPS URL because the SSL module is not available."
            )

actual_host: str = self.host
        actual_port = self.port
        if self.proxy is not None and self.proxy.host is not None:
            actual_host = self.proxy.host
            actual_port = self.proxy.port

return self.ConnectionCls(
            host=actual_host,
            port=actual_port,
            timeout=self.timeout.connect_timeout,
            cert_file=self.cert_file,
            key_file=self.key_file,
            key_password=self.key_password,
            cert_reqs=self.cert_reqs,
            ca_certs=self.ca_certs,
            ca_cert_dir=self.ca_cert_dir,
            assert_hostname=self.assert_hostname,
            assert_fingerprint=self.assert_fingerprint,
            ssl_version=self.ssl_version,
            ssl_minimum_version=self.ssl_minimum_version,
            ssl_maximum_version=self.ssl_maximum_version,
            **self.conn_kw,
        )

def _validate_conn(self, conn: BaseHTTPConnection) -> None:
        """
        Called right before a request is made, after the socket is created.
        """
        super()._validate_conn(conn)

# Force connect early to allow us to validate the connection.
        if conn.is_closed:
            conn.connect()

if not conn.is_verified:
            warnings.warn(
                (
                    f"Unverified HTTPS request is being made to host '{conn.host}'. "
                    "Adding certificate verification is strongly advised. See: "
                    "https://urllib3.readthedocs.io/en/latest/advanced-usage.html"
                    "#tls-warnings"
                ),
                InsecureRequestWarning,
            )

def connection_from_url(url: str, **kw: typing.Any) -> HTTPConnectionPool:
    """
    Given a url, return an :class:`.ConnectionPool` instance of its host.

This is a shortcut for not having to parse out the scheme, host, and port
    of the url before creating an :class:`.ConnectionPool` instance.

:param url:
        Absolute URL string that must include the scheme. Port is optional.

:param \\**kw:
        Passes additional parameters to the constructor of the appropriate
        :class:`.ConnectionPool`. Useful for specifying things like
        timeout, maxsize, headers, etc.

Example::

>>> conn = connection_from_url('http://google.com/')
        >>> r = conn.request('GET', '/')
    """
    scheme, _, host, port, *_ = parse_url(url)
    scheme = scheme or "http"
    port = port or port_by_scheme.get(scheme, 80)
    if scheme == "https":
        return HTTPSConnectionPool(host, port=port, **kw)  # type: ignore[arg-type]
    else:
        return HTTPConnectionPool(host, port=port, **kw)  # type: ignore[arg-type]

@typing.overload
def _normalize_host(host: None, scheme: str | None) -> None:
    ...

@typing.overload
def _normalize_host(host: str, scheme: str | None) -> str:
    ...

def _normalize_host(host: str | None, scheme: str | None) -> str | None:
    """
    Normalize hosts for comparisons and use with sockets.
    """

host = normalize_host(host, scheme)

# httplib doesn't like it when we include brackets in IPv6 addresses
    # Specifically, if we include brackets but also pass the port then
    # httplib crazily doubles up the square brackets on the Host header.
    # Instead, we need to make sure we never pass ``None`` as the port.
    # However, for backward compatibility reasons we can't actually
    # *assert* that.  See http://bugs.python.org/issue28539
    if host and host.startswith("[") and host.endswith("]"):
        host = host[1:-1]
    return host

def _url_from_pool(
    pool: HTTPConnectionPool | HTTPSConnectionPool, path: str | None = None
) -> str:
    """Returns the URL from a given connection pool. This is mainly used for testing and logging."""
    return Url(scheme=pool.scheme, host=pool.host, port=pool.port, path=path).url

def _close_pool_connections(pool: queue.LifoQueue[typing.Any]) -> None:
    """Drains a queue of connections and closes each one."""
    try:
        while True:
            conn = pool.get(block=False)
            if conn:
                conn.close()
    except queue.Empty:
        pass  # Done.

System Information
*ReClick For Close
File : BlackDragon /about/function.php

Name	Type	Size	Owner/Group	Permission	Last Modified	Actions
.	dir	-	root/root	0755	2023-09-24 06:26:03
..	dir	-	root/root	0755	2024-03-18 03:02:40
__pycache__	dir	-	root/root	0755	2023-09-24 06:27:58
contrib	dir	-	root/root	0755	2023-09-24 06:26:03
util	dir	-	root/root	0755	2023-09-24 06:26:03
__init__.py	text/plain	5.18 KB	root/root	0644	2023-09-05 09:10:13
_base_connection.py	text/x-python	5.52 KB	root/root	0644	2023-09-05 09:10:13
_collections.py	text/x-python	16.42 KB	root/root	0644	2023-09-05 09:10:13
_request_methods.py	text/x-python	7.57 KB	root/root	0644	2023-09-05 09:10:13
_version.py	text/x-python	98 B	root/root	0644	2023-09-05 09:10:13
connection.py	text/x-python	33.04 KB	root/root	0644	2023-09-05 09:10:13
connectionpool.py	text/x-python	41.95 KB	root/root	0644	2023-09-05 09:10:13
exceptions.py	text/x-python	9.17 KB	root/root	0644	2023-09-05 09:10:13
fields.py	text/x-python	10.77 KB	root/root	0644	2023-09-05 09:10:13
filepost.py	text/x-python	2.34 KB	root/root	0644	2023-09-05 09:10:13
poolmanager.py	text/x-python	22.12 KB	root/root	0644	2023-09-05 09:10:13
py.typed	text/plain	93 B	root/root	0644	2023-09-05 09:10:13
response.py	text/x-python	39.15 KB	root/root	0644	2023-09-05 09:10:13